How to Take Apart a Murphy Bed
You’re tackling a big project, but I’ve got you covered. You’ll obviously need a helper and basic tools like a drill, wrench, and flathead screwdriver. Start by clearing space and removing the mattress to relieve pressure. With your helper, slowly unscrew the frame from the cabinet, then carefully disconnect the two hydraulic pistons. Label every part you remove; that step is your secret weapon for a smooth rebuild later.
Prepare Your Space and Tools for Murphy Bed Disassembly
You’re probably wondering where to even start, right? First, nail your workspace layout. You’ll need at least three feet of clearance on every side for maneuvering parts. Move furniture, lay down blankets to protect your floor, and clear all tripping hazards. Next, your tool selection is critical. Gather Phillips and flat-head screwdrivers, an adjustable wrench, and Allen keys. You’ll want a cordless drill for efficiency and a hammer for stubborn bits. Don’t skimp on safety either—wear goggles and gloves. Take photos before you touch anything and label every screw. This prep prevents chaos later. Keep in mind the original installation likely required wall reinforcement for safety. Begin by locating and disconnecting the pivoting mechanism and lifting hardware. Your clear, tool-ready space sets the stage for a controlled disassembly. Now you’re ready to safely address the bed itself. Before lowering the bed, remove the crown molding and wall screws to detach it from the wall structure. As with dismantling a bunk bed, systematically detach all protective railings before handling the main framework.
VERTICAL QUEEN DIY MUPRPHY BED - Cabinet finished measurements: 86-7/8 in H x 66-3/8 in W x 16 in D (closed) x 86 in D(open) See images for dimensions for hide away bed. High quality Murphy bed kit.
High Quality Powder Coated Steel Hardware: The Queen size murphy bed kit comes with sturdy hardware capable of holding up to 550 lbs on the murphy bed frame. This Queen Hideaway bed kit is a durable space saving furniture solution.
Safely Secure and Detach the Mattress and Bed Frame
Some people worry removing the mattress first makes the bed unstable, but that’s the whole point—it’s the safest first step. You’ll relieve pressure on the mechanism. Begin by securing the bed down, using three L-brackets into wall studs for safety. Now, for the mattress handling: clear all bedding and detach any straps. You’ll need a helper to firmly hold the front panel down while you pull the mattress free. This important step lightens the whole structure.
Next, support the bed frame itself. Locate and slowly unscrew the bolts securing it to the cabinet while your helper counters any movement. Once bolts are out, carefully tip the front panel up and lift it from its slots—it’s very heavy. This controlled approach helps avoid the pinch point hazards inherent in the moving mechanisms. You’re now ready to address the frame components, mindful of the stored spring tension in the arms. Before working with the lifting mechanism, refer to the original installation guide to understand its specific hardware components. Periodically inspect the anchors to ensure the wall brackets remain stable over time after reassembly.
Real Hidden Brackests: These black shelf brackets have no lips and can be truly hidden. The base can be blocked by the plank, creating an amazing floating illusion. Compared with other floating shelf brackets, this bracket is easier to install
Size- L 4" x H 3" x W 1-1/2" – No more than 3" past the edge of the bracket should be unsupported – The wood boards are not included
【Standard 90° bending】In order to ensure that each shelf bracket can be at 90° to the maximum extent possible, we add a rigorous picking process before the shelf brackets are packaged. The standardized 90-degree design is so important that it’ s the objective factor in ensuring that items remain level and do not tip over after being placed on the board(board is not included).
Disconnect the Piston and Cylinder System
Since you’re wondering how to tackle the hydraulic pistons, that’s actually the key to making the bed frame manageable and safe to remove. Now, you’ll need a helper to pull the bed out slightly. First, pry back the retaining clip on each piston’s upper fitting with a flathead screwdriver. Pull the piston off its ball stud; your helper adjusts the frame for alignment. Repeat for both pistons.
Here’s the thing: always maintain a firm grip on the frame. This prevents a sudden collapse. Once disconnected, you can slowly lower the heavy frame to the floor with assistance. Now you can address the lower piston connections. The piston body label arrow must point upward toward the cabinet top when reinstalling.
Finally, examine these components. You might consider future piston lubrication or full cylinder rebuilding if they’re worn. This foresight prevents future trouble. When reinstalling, ensure your wall stud placement is correct to handle the mechanism’s weight safely. The piston system is part of a sophisticated spring or piston counterbalance that makes the bed easy to lift and lower. This counterbalance mechanism is essential for the vertical pivot that allows the bed to fold away neatly. Next, you’ll be ready to detach that heavy frame.
EASY INSTALLATION WITH ALL REQUIRED TOOLS INCLUDED. With the office chair gas cylinder replacement kit, you'll get all of the replacement parts, tools and instructions that you will need to breathe life into your old chair!
Rebuild kit compatible with Shimano hydraulic disc brake calipers.
Hardware repair kit for office chair gas lift cylinders
Detach the Heavy Metal Bed Frame From the Cabinet
Once those pistons are disconnected, tackling the heavy frame feels intimidating, but it’s really about methodical disassembly. Now you’ll detach the frame. With a helper, pull the bed open slightly to recess the frame into the cabinet. Slowly lower it to the floor, bracing a foot against the side for leverage. Here’s the thing: load capacity considerations are pivotal here, as the metal frame is extremely heavy. Slide the frame forward out of its cabinet slots once it’s down. You’ll then unscrew the lower header board from the cabinet sides. This process was a solo effort characterized as destruction versus assembly. For future builds, explore frame material alternatives like aluminum for lighter weight, and always adhere to recommended weight limits for structural safety. For a sturdy DIY alternative, consider building a bunk-bed ladder using evenly spaced rungs and secure fasteners. Your takeaway: stabilize, lower with control, and unbolt methodically. Next, you’ll handle the cabinet facade. This heavy disassembly underscores why a king‑size Murphy bed requires reinforced walls and ceiling clearance, as detailed in specifications for these large units.
GOODBYE BOX SPRING: Sturdy steel construction with a surface grid pattern, anti-slip treads, and a foldable design provide even support, exceptional stability, and ultimate convenience with or without a box spring
STURDY SUPPORT: This queen bed frame, with no box spring needed, provides a noise-free, supportive foundation. The queen size platform bed frame allows your mattress to stay in place comfortably
HEAVY-DUTY DOUBLE-LAYER STEEL – 4000 LBS CAPACITY Designed as a queen bed frame, this sturdy base features double-layer steel pipe construction. Also available as a queen size bed frame, it delivers reliable support with reinforced center legs and a powder-coated surface that resists rust. Supports up to 4000 lbs—no box spring needed
Remove the Murphy Bed Facades and Stop Molding
You’re wondering how to get those front panels off without wrecking everything—smart move, because this is where a careful touch really pays off. For safety and to verify the bed is empty, it’s critical to first check the load capacity per the manufacturer’s specifications before starting any disassembly.
Your first priority is molding preservation. Remove all exterior casing and trim from the top surfaces first with a Phillips screwdriver. Store these pieces organizedly; it prevents finish damage and makes reassembly possible. Always document your process with photos to reference later, similar to the method used when separating bunk bed frames.
Now loosen the cam housings on the stringer boards. You must extract every fastener completely before separating the facade panels. Get a helper to stabilize them during this step. You systematically remove all support boards from the bed back. That careful extraction prevents structural damage. Once your bed is disassembled, efficiently storing its linens requires a specific folding technique for compact spaces.
Your takeaway: methodical removal protects the components. Next, you’ll safely take down the cabinet and header from the wall.
STRENGTH AND DURABILITY: Made of heat-treated alloy steel
Starts and drives screws with one hand when working in hard-to-reach spaces
CR-MO heat-treated blade for up to up to 2X longer tip life
Safely Take Down the Cabinet and Header From the Wall
Once all fasteners are free, coordinate a gentle, outward pull. Lift it straight away from the wall together and lower it flat onto padded blankets. That controlled teamwork gets it down safely. Proper planning and following a detailed guide from the installation process will help ensure each step is clear. Before further breakdown, you should label all parts for easier reassembly later. Properly handling the bed mechanism now will help avoid future repair costs. For the next breakdown steps, consult your original design plans or building guide. Next, you’ll want to organize all those parts.
Label and Organize Parts for Easy Reassembly
It’s smart to feel overwhelmed staring at all those pieces—labeling them properly is your key to a frustration-free rebuild. Start with Diagram Referencing; page 8 of your guide is your map. Use painter’s tape or sticky labels on non-visible surfaces to mark parts like sides F or top GE, copying letter codes directly. Label all cut parts as specified in your cutting guide to ensure accurate tracking. Just as in the DIY Folding Bed Guide, clear labeling of components like plywood panels is essential for a smooth assembly process. Following a measured plan, like the initial steps in a DIY Bunk Bed Guide, ensures all components are correctly identified from the start.
Now, organize as you disassemble. Group cabinet sections together and note mating surfaces. For Hardware Categorization, bag all lag bolts, washers, and eye bolts separately by type. Mark their original positions.
This systematic approach prevents confusion later. Your next focus is protecting these labeled components during storage before you reassemble.
Essential Safety Tips for Murphy Bed Disassembly
Safety is the obvious priority when taking apart a Murphy bed, so let’s get straight into how you do this without hurting yourself or damaging anything. You’ll absolutely need a helper. The bed frame gets dangerously heavy after piston removal, so one person must secure it while the other works. Secure the cabinet to a wall stud first. Use a clamp to prevent the frame from falling. Lower everything slowly with a helper onto a padded floor. Now, here’s the thing: you must keep components organized. Label every part and take photos. This meticulous step is non-negotiable for a safe piston reinstallation and cabinet reassembly later. Your clear takeaway? Rushing causes injuries and mistakes.
